HULL PRO: TOP TO BOTTOM PROTECTION ON A GRADY WHITE 405

April 19, 2024

PANAMA CITY BEACH, FL

EMERALD COAST CLEAN WERKS

Charlie Greenich and his team at Emerald Coast Clean Werks just completed a full Hull Pro application on this stunning 405 Grady White — and they didn’t stop at the hull. This boat’s painted-to-match outboards and lower units were also coated with Hull Pro, offering full-spectrum protection from the waterline down. From preserving custom paint to improving performance, this Grady is now fully sealed, fully protected, and ready for a cleaner, faster season.

PREPARATION MAKES THE PROTECTION LAST

For Charlie and his team, surface prep isn’t a step — it’s a standard.

Every great Hull Pro installation starts with attention to detail. Before coating this 405 Grady White, Charlie and his team performed a full exterior wash to remove any debris, followed by a thorough sanding of the gelcoat and outboard surfaces. Sanding at 600 grit created the perfect profile for Hull Pro to bond, ensuring even coverage and long-term adhesion — even on tight contours and complex surfaces like outboard cowlings.

By sanding and inspecting as they went, the team ensured Hull Pro was applied correctly across all areas, from the hull bottom to the sleek twin Yamaha engines. This careful prep gives boat owners peace of mind and maximizes the lifespan of their coating in both saltwater and brackish environments.

PAINTED-TO-MATCH OUTBOARDS? NOW THEY'RE PROTECTED, TOO

Hull Pro isn't just for gelcoat — it protects factory and custom paint finishes alike.

This Grady White stands out with painted-to-match outboards — a sleek, high-end aesthetic that deserves the best protection. Emerald Coast Clean Werks treated these custom-painted engine cowlings with the same care and precision as the hull itself. With Hull Pro applied, these painted surfaces are now sealed against UV fade, oxidation, water spots, and minor scuffs.

Unlike waxes or sacrificial coatings that wear off fast, Hull Pro provides a long-lasting ceramic shield that enhances color, gloss, and depth — no matter the paint code. Plus, the lower units were coated as well, helping prevent buildup and making end-of-season cleanup a breeze.

SPEED, SHINE, AND LESS SCRUBBING ALL SEASON LONG

Hull Pro delivers on what matters most to serious boaters.

The Grady White 405 is built for performance, and Hull Pro ensures that performance isn’t held back by growth or drag. By coating the hull, engines, and lower units, this install minimizes resistance and helps the vessel move more efficiently through the water. Owners can expect reduced fuel consumption, faster planning, and fewer hours spent cleaning or polishing at the dock.

The coating also provides critical protection against hull osmosis and blistering, preserving the integrity of the fiberglass and adding resale value in the long run. Hull Pro’s non-ablative, non-sacrificial finish won’t rub off on lifts or bunks, and it’s easy to reset season after season with just a pressure wash and light scrub.

GET IT DONE RIGHT ON THE EMERALD COAST

Book with Charlie at Emerald Coast Clean Werks — the panhandle’s Hull Pro expert.

Whether you're in Destin, Fort Walton, or anywhere along Florida’s Emerald Coast, Charlie Greenich and his team have you covered. With years of detailing experience and a deep commitment to doing the job right, Emerald Coast Clean Werks is trusted by discerning boaters who want lasting protection and a high-end finish.

If you want your Grady — or any boat — looking this sharp and running this clean, book a Hull Pro installation with Emerald Coast Clean Werks today.