Hull Pro Limited Manufacturer's Warranty
Hull Pro is backed by a limited manufacturer's warranty. Here is exactly what that means.
Coverage depends on your water type and how you store your vessel. Read what applies to you — the conditions are real, and they matter. A warranty that isn't maintained isn't a warranty.
Warranty at a Glance
Freshwater
5 Years
Lift / Trailer / Dry-Rack
5 Years
Brackish Water
5 Years
Saltwater
3 Years
Certified installer required for all tiers. Select your water type below to read the full terms.
Before You Read the Warranty
This warranty has real requirements. Here is what you need to know upfront.
Hull Pro's warranty covers product delamination — not wear, not abrasion, not grounding damage. It is a manufacturing defect warranty, not a maintenance guarantee. If the coating fails because of a product issue, Armus will supply replacement material. If it fails because of missed maintenance, improper care, or a non-certified installer, it will not be covered.
The warranty requires annual inspections, seasonal reset cleanings, and ongoing maintenance through a certified Armus installer. Those requirements exist because Hull Pro performs best when it is maintained properly — and because a warranty that doesn't reflect real-world maintenance expectations isn't honest.
Required for All Warranty Tiers
Certified Armus installer — installation and all maintenance
Annual inspection — photo and video documentation submitted to Armus
End-of-season reset cleaning — every season, without exception
$10–15/linear foot seasonal inspection and maintenance fee to the certified installer/dealer managing vessel care
Jump to the warranty that applies to your vessel.
Freshwater
Lakes, rivers, and inland waterways.
5 Years
Read Terms → Varies by LocationBrackish Water
Tidal rivers, estuaries, and mixed-water environments.
5 Years
Read Terms → Works with MaintenanceSaltwater
Open ocean, coastal, and offshore environments.
3 Years
Read Terms → All ConditionsLift / Trailer / Dry-Rack
Vessels stored out of water between uses.
5 Years
Read Terms →Freshwater
Hull Pro Limited Manufacturer's Warranty — Freshwater
What's Covered
Armus warrants that Hull Pro, when applied by a certified Armus installer to vessels used exclusively in freshwater environments, will remain free from product delamination for 5 years from the date of installation.
If delamination occurs and all warranty conditions have been met, Armus will supply replacement Hull Pro material for reapplication to the affected area. Labor is not covered.
What's Not Covered
- Mechanical abrasion, impact damage, or physical wear
- Damage from improper use, negligence, misuse, or acts of nature
- Maintenance or repairs by a non-certified installer
- Missed annual inspections or end-of-season reset cleanings
To Keep Your Warranty Active
- Certified installation — Hull Pro must be installed by an Armus certified installer
- Annual inspection — photo and video documentation submitted to Armus each year
- End-of-season reset cleaning — mandatory every season by a certified installer
- $10–15/linear foot seasonal inspection and maintenance fee to certified dealer managing care
- Touch-up kits ordered through your certified installer if needed
Brackish Water
Hull Pro Limited Manufacturer's Warranty — Brackish Water
What's Covered
Armus warrants that Hull Pro, when applied by a certified Armus installer to vessels used in brackish water environments, will remain free from product delamination for 5 years from the date of installation.
Brackish water carries additional documentation requirements beyond freshwater. Hull cleanings must be documented by both the vessel owner and a qualified hull diver with photographic evidence submitted to Armus.
What's Not Covered
- Mechanical abrasion, impact damage, or physical wear
- Damage from improper use, negligence, or acts of nature
- Maintenance by a non-certified installer
- Missed or undocumented hull cleanings
- Missed inspections or end-of-season reset cleanings
To Keep Your Warranty Active
- Certified installation — Hull Pro must be installed by an Armus certified installer
- Annual inspection — photo and video documentation submitted to Armus each year
- Required hull cleanings — documented by vessel owner AND qualified hull diver with photos submitted to Armus
- End-of-season reset cleaning — mandatory every season by a certified installer
- $10–15/linear foot seasonal inspection and maintenance fee to certified dealer managing care
Saltwater
Hull Pro Limited Manufacturer's Warranty — Saltwater
What's Covered
Armus warrants that Hull Pro, when applied by a certified Armus installer to vessels used in saltwater environments, will remain free from product delamination for 3 years from the date of installation.
Saltwater is the most demanding environment for Hull Pro. The 3-year coverage reflects the additional maintenance burden and the stricter documentation requirements required to keep the warranty active.
What's Not Covered
- Mechanical abrasion, impact damage, or physical wear
- Damage from improper use, negligence, or acts of nature
- Maintenance by a non-certified installer
- Missed or undocumented hull cleanings — any single missed cleaning voids the warranty
- Missed annual inspections or end-of-season reset cleanings
To Keep Your Warranty Active
- Certified installation — Hull Pro must be installed by an Armus certified installer
- Annual inspection — photo and video documentation submitted to Armus each year
- Required hull cleanings — documented by vessel owner AND qualified hull diver with photos. Any missed cleaning voids coverage.
- End-of-season reset cleaning — mandatory every season by a certified installer
- $10–15/linear foot seasonal inspection and maintenance fee to certified dealer managing care
Lift / Trailer / Dry-Rack
Hull Pro Limited Manufacturer's Warranty — Lift, Trailer & Dry-Rack
What's Covered
Armus warrants that Hull Pro, when applied by a certified Armus installer to vessels stored on a lift, trailer, or dry-rack, will remain free from product delamination for 5 years from the date of installation.
Same coverage as freshwater — replacement Hull Pro material for reapplication to the affected area if delamination occurs and all conditions are met. Labor not covered.
What's Not Covered
- Mechanical abrasion, impact damage, or physical wear
- Damage from improper use, negligence, or acts of nature
- Maintenance or repairs by a non-certified installer
- Missed inspections or missed end-of-season reset cleanings
To Keep Your Warranty Active
- Certified installation — Hull Pro must be installed by an Armus certified installer
- Annual inspection — photo and video documentation submitted to Armus each year
- End-of-season reset cleaning — mandatory every season by a certified installer
- $10–15/linear foot seasonal inspection and maintenance fee to certified dealer managing care
- Touch-up kits ordered through your certified installer if needed
DIY Customers
Self-applied Hull Pro is not covered by this warranty.
The warranty requires certified installer installation and ongoing certified maintenance. DIY applications are not eligible.
If you apply Hull Pro yourself and experience an issue within 96 hours of application, contact Armus at info@armussolutions.com — we will do our best to work through it with you directly.
Questions about the warranty or your specific situation? Contact us before you buy — we'll give you a straight answer.