Hull Pro Testimonials

I love the change in the industry. You know, I think it’s gonna help clients with not only keeping the value of the vessel for resale, but also fuel efficiency and increased speed. It’s epoxy!

This is the best boat I’ve ever had and I couldn’t put bottom paint on something like that. So Hull Pro was just the way to go. Love the look of Hull Pro, because it’s virtually invisible, but it’s ultra smooth. Looks just like the gelcoat, like it’s not there!

Armus Hull Pro. Absolutely beautiful. Clear as can be and durable.

It’s been a few months with Hull Pro so far, and my hull has no yellowing! My performance numbers improved 1-2mph top end and I'm running about 100 less RPMs at cruise. Where is see the most improvement is in the whole shot and mid-range to top speed acceleration

Hull Pro saves me $35 a day on my fuel. I’ll be doing my other boat soon! Saw a 17% increase in my fuel economy!

Keeping my boat in the water for 2-3 weeks, I can dry rack the boat and easily pressure wash the bottom in less than 30 min! Top speed, I got about 4mph faster too. I highly recommend Hull Pro, it makes life so much easier.

The application for Hull Pro is very straightforward. the self-leveling of this epoxy seems very high-end which is part of this amazing technology. I like this product so much because of its sheer strength. My rating is A+ two thumbs up!

With Hull Pro, in testing, we were very quick. Running an otherwise identical setup on the same course, Hull Pro picked up 1.5 mph on the straightaway, and 2 mph on the corners.

In racing conditions, the boat was very fast. I was able to stay ahead of previous champions and world record holders. I picked up about 3 mph on the straightaways on the fasted in the world with Hull Pro.

Thanks to Armus Marine for the support, I’m very pleased with the performance improvements I’ve seen, and I have had many people commenting on how much our boat has improved recently.

I work for Freedom Boat Club over here in Lake Oconee area. We’ve been using Hull Pro for the last three years. We've seen a big difference on all our boats. The clean up time, the way the boats handle on the water, the way the toons look after everything's said and done.

We typically run our boats all summer long in the water, pull them out. We'll go ahead and clean all the tunes off really good. It takes us about 10 to 15 minutes at most with no acids, no pressure washer or anything else. Just like a magic eraser and water and rag.

When we go to sell a boat at the end of the year, we've sold one boat that was not coded for roughly around 29 K, same exact boat, 34 just because of the coating and everything else, the way the toons looked.

So if you're looking at getting the most out of your boats and the easiest clean up, go ahead and use Hull Pro. We guarantee you'll love it.

With Hull Pro, in testing, we were very quick. Running an otherwise identical setup on the same course, Hull Pro picked up 1.5 mph on the straightaway, and 2 mph on the corners.

In racing conditions, the boat was very fast. I was able to stay ahead of previous champions and world record holders. I picked up about 3 mph on the straightaways on the fasted in the world with Hull Pro.

Thanks to Armus Marine for the support, I’m very pleased with the performance improvements I’ve seen, and I have had many people commenting on how much our boat has improved recently.

We are very pleased with the product! In the water for 7 weeks in South NJ, and it’s easy cleaning. The Hull Pro product is impressive!

I needed an answer for unsightly, old bottom paint on a used boat I recently purchased. This boat is stored on a lift, and I didn't want to paint it every few years because the paint was wearing and stained.

After months of investigating different options, I found Hull Pro. After speaking with Rob and talking to a few Hull Pro users with similar objectives, I decided to give it a shot.

Four months after application and 200 hours of use later, the hull looks perfect! This stuff is virtually invisible. It doesn't stain yellow from the algae Leiden-water, and virtually nothing sticks to it. Hull Pro has exceeded my expectations.

I tried Armus Hull Pro. Supposedly it is a bit harder than Hull Maxx. My diver is going to clean every 3 weeks as of now to see how it does.

I will tell you my fuel economy jumped drastically on the ride home though… I ran it 4400 rpm moving 50 mph and burning .78-.80 which is insane for that 47! Before we would sit around .70 so I was very thrilled to see that

Wow! Hull Pro is an amazing product. I’m sold on it. My name is Craig Cowdell, I’ve been in the Marine business for 17 years at Legendary Marine.

It takes a lot for me to get excited about a new product. I’m sold, I’m excited about Hull Pro for sure. I’ve been selling Everglades boats since 2007, I also run and maintain a 2024 Everglades 455CC called Colorblind in Panama City Beach, FL.

We like to keep Colorblind in the water for extended periods of time. Sometimes up to three weeks. Hull Pro was introduced and recommended to me by a local vendor. After researching it, it sounded like something we needed in our life. That it did, my life got a whole lot easier after Hull Pro was applied to Colorblind.

Keeping her in the water for 2-3 weeks, I can dry rack the boat and easily pressure wash the bottom in less than 30 minutes. Zero yellowing on the hull. Any growth on the bottom comes off easily. We ran Colorblind tons during 4th of July week, she was in water for 14 days. I cleaned the bottom in 20 minutes on dry rack yesterday. Probably could have just used a brush without a pressure washer.

My performance got better too. Colorblind is powered by Quad Yamaha 450’s. Usually I could keep the .5mpg up to 3800 RPM’s, after that it would go to .4 mpg. After applying Hull Pro, I can easily maintain .5 up to 5200 RPM’s now. Top speed, I got about 4mph faster too.

I highly recommend Hull Pro, it makes life so much easier, keeping up and cleaning the bottom of your boat. If you have any questions feel free to call me to discuss.

As someone who reviews over 500 boats annually, I am genuinely impressed by Armus Hull Pro. Its advanced technology, durability and positive impact on boat performance are truly remarkable.

Moreover, it offers a solution that minimizes environmental concerns and maintains a pleasing appearance, distinguishing itself from traditional anti-foul options. Going forward, I wholeheartedly intend to use the Hull Pro coating on all my future boat evaluations.

In my professional opinion, after using this Hull Pro for a year, Armus definitely shows more performance than bare gel coat, and it provides fouling protection, with a dive clean necessary only once every 3 weeks.

Love Hull Pro. It’s saving us a lot of money on bottom cleaning. We’re bottom cleaning every 3rd week as opposed to every week.

We’re seeing greater fuel economy and more speed out of the boats too, which makes us very happy, and it’s protecting the bottom.

Unlike competing products, this product is stronger than gel coat and doesn’t come off when our vessel is lifted.

We never use anti-fouling paint... this is the best product we’ve seen without biocides. The speed and fuel savings were just a pleasantly added benefit!

It’s an unbelievable product and I’d recommend it to anyone.

I’m Loving It! Almost ten months in and Im really enjoying the benefits of Hull Pro. However, life is rarely a bowl of cherries without pits, meaning you really have to maintain a regular cleaning schedule and stay on top of this product. Otherwise, without proper and ongoing care, a build-up of hard growth may require you to pull your boat out of the water for a hard reset.

Still, Hull Pro offers benefits to boaters who not only keep their boat in the water but also to boaters on a lift. These include no yellowing/staining and protection from harsh metal/wood surfaces on boatlifts and forklifts, etc.