HULL PRO: SIX MONTHS ON A SEA-DOO RXTX 300 WITH FLORIDA SKI RIDERS

December 18, 2025

PARRISH, FL

FLORIDA SKI RIDERS

Randy and the Florida Ski Riders crew put Hull Pro on their Sea-Doo RXTX 300 six months ago — and they didn't baby it. Rivers, beaches, sea shells, submerged logs, and everything else Florida and the Caloosahatchee River throws at a performance ski. The hull wasn't in great shape going in. Six months later, Randy says it looks brand new. Here's the full story.

A JET SKI HULL THAT NEEDED HELP — AND GOT IT

Hull Pro isn't only for new boats in perfect condition. The RXTX 300 came in with blemishes, scratches, and scuffs from real riding in real conditions. Surface prep was the priority — sanding, scuffing, and cleaning the hull down to a proper base before the product ever touched the surface. After application, the transformation was immediate. A hull that looked worn out came out looking brand new.

That's one of the less-talked-about benefits of Hull Pro. On a surface that's been through it, proper prep followed by a clean application restores appearance while adding a protective layer going forward. Randy wasn't expecting a cosmetic result — but he got one.

THE RIDE CHANGED. BOTH OF THEM NOTICED.

Randy knows what a new ski feels like on the water. Fresh out of the dealership, before the first beach landing and the first river run — that feeling of riding on glass. After Hull Pro, he got it back. His wife noticed it too, independently, without being prompted. The hull smoothed out, the ride settled, and the ski felt like it had just rolled off the showroom floor.

Speed followed. The RXTX 300 went from 81 mph to 82 or 83 — roughly a 2 mph gain. Randy is clear that speed wasn't the goal. Protection was. The speed increase was a byproduct of a cleaner, smoother hull moving through the water with less resistance.

RIDE WITH FLORIDA SKI RIDERS

Randy doesn't put his name on products he doesn't believe in. Hull Pro is on his fleet and staying there. If you want to know more about what Hull Pro does for performance PWCs and high-output skis, reach out to Florida Ski Riders directly — they've put this product through six months of conditions that most hull coatings never see.

HULL PRO FOR PERSONAL WATERCRAFT AND HIGH-PERFORMANCE SKIS

Hull Pro bonds to fiberglass and protects every surface below the waterline — including the hull bottom, intake grate, and ride plate on a performance PWC. It's a clear, non-ablative protective coating that adds impact resistance, reduces drag, and preserves the appearance of a hull that takes serious abuse on the water.

For riders who beach their skis, run rivers, and push their watercraft hard across varied conditions, Hull Pro offers something bottom paint never could — protection you can't see, performance you absolutely can feel, and a hull that holds up season after season without reapplication.

SIX MONTHS OF REAL RIDING. REAL CONDITIONS. REAL RESULTS.

Florida Ski Riders don't ride easy water. Rivers, open water, beaches, sea shells, submerged obstacles — six months of the kind of riding that puts hull protection to its actual test. The RXTX 300 has been beached, jumped, and pushed through conditions that would show damage on an unprotected hull.

Six months in, Randy reports no visible scratches. A couple of scuffs — which is exactly what you'd expect from that kind of riding. But no damage that cut through to the fiberglass. Hull Pro absorbed the contact and held up. That's the result Randy was after from day one, and the reason he says it will be on every single watercraft Florida Ski Riders owns.

HULL PRO ON A PWC: SIX MONTHS WITH FLORIDA SKI RIDERS

Randy of Florida Ski Riders installed Hull Pro on their Sea-Doo RXTX 300 six months ago — not on a new ski, but on a hull that already had blemishes, scratches, and real riding miles on it. After application, the hull looked brand new. On the water, it felt like one too. Six months of rivers, beaches, sea shells, and submerged obstacles later, the coating is holding and it's going on every watercraft they own.