HULL PRO: UNLOCKING PERFORMANCE AND FUEL SAVINGS ON A 43' FREEMAN

September 15, 2024

SUMMERVILLE, SC

WICKED OUTBOARDS

Wicked Outboards in Summerville, SC, has once again delivered a flawless Hull Pro application—this time on another 43' Freeman. This high-performance catamaran now benefits from enhanced fuel efficiency, increased speed, and long-term gelcoat protection, all without the drawbacks of traditional bottom paint. With expert prep and application, this Freeman is set for smooth sailing and effortless maintenance.

A SMOOTH, HIGH-GLOSS FINISH WITHOUT SANDING

For this 43' Freeman, Wicked Outboards applied Hull Pro without the need for sanding or scuffing. Since the gelcoat was already in excellent condition, a thorough cleaning and acetone wipe-down ensured a strong bond between the coating and the hull. One of the standout benefits of Hull Pro is its ability to revive and enhance the boat’s original gelcoat, delivering a mirror-like finish that enhances both aesthetics and performance.

The key to achieving Hull Pro’s signature high-gloss finish is in the prep. Even when sanding isn't required, the removal of surface contaminants, oxidation, and residue is critical for maximum adhesion. Wicked Outboards ensured that every inch of the hull was cleaned properly before applying Hull Pro, allowing the coating to level perfectly and produce a deep, reflective shine. This Freeman now stands out on the water, with a finish that’s both durable and visually stunning.

MAINTENANCE KEEPS HULL PRO IN TOP CONDITION FOR MULTIPLE SEASONS

While Hull Pro does not prevent marine growth, it makes cleaning significantly easier by reducing adhesion of biofouling and surface contaminants. Instead of aggressive scrubbing or harmful chemicals, a quick power wash or light wipe-down with a non-acid hull cleaner restores the coating’s high-gloss surface. Regular maintenance, including diver cleanings for boats kept in the water, ensures this Freeman stays sleek and efficient all season long.

The maintenance routine for a Hull Pro-coated vessel depends on the water conditions and frequency of use. In warmer waters, where growth is more aggressive, a monthly diver cleaning can help keep the hull pristine. For boats that are pulled out of the water seasonally, a simple reset cleaning—using light detergent and a pressure wash—can restore the coating’s shine without the need for reapplication. This flexibility allows boat owners to tailor their maintenance strategy to their specific region and usage, making Hull Pro a versatile and low-maintenance solution for long-term protection.

FUEL SAVINGS ADD UP WITH HULL PRO

Performance catamarans like the Freeman 43 are built for speed, but drag from a rough or fouled hull can reduce efficiency. With Hull Pro, Freeman owners report speed gains of 2-3 mph at cruise and fuel savings up to 15%, making long offshore runs more economical. Over time, the savings on fuel alone make Hull Pro a smart investment for those who run their boats hard.

These performance benefits don’t just improve speed and efficiency—they also reduce wear and tear on engines. Running at lower RPMs while maintaining the same cruising speed means less strain on motors, which can lead to longer engine life and fewer maintenance costs. Offshore anglers and tournament fishermen who rely on top-tier performance can appreciate the competitive edge Hull Pro provides, keeping their vessels running at peak efficiency trip after trip.

REACH OUT TO WICKED OUTBOARDS FOR YOUR HULL PRO INSTALLATION

Zach and the team at Wicked Outboards are experts in high-performance boat maintenance and protection. With extensive experience in performance catamarans, they know how to maximize results with Hull Pro. If you're in the Summerville, SC, area and looking to protect your boat, Wicked Outboards is the go-to shop for professional application and expert advice.

Wicked Outboards takes pride in tailoring each Hull Pro application to the specific needs of the vessel and owner. Whether it’s a performance-driven catamaran, a sandbar-friendly center console, or a freshwater fishing rig, Zach and his team ensure that every boat receives top-tier preparation and application. Their hands-on expertise and commitment to customer satisfaction make them a trusted partner in the Armus Marine network. For Freeman owners looking to preserve their investment and optimize their boat’s performance, Wicked Outboards is the name to trust.